Oxva Origin X 510 Adaptor
One small accessory that genuinely changes what the Origin X can do. Snap this adaptor onto your OXVA Origin X in place of the pod and you've got a 510-thread mod capable of running tanks and rebuildables up to 24mm wide. If you already own the Origin X and want more flexibility from it, this is the most sensible purchase you can make.
Overview
The OXVA Origin X 510 Adaptor is a direct replacement for the standard pod on the Origin X kit. It uses the same magnetic connection as the pod, so installation is as simple as pulling one off and pushing the other on. From there, any standard 510-threaded tank or atomiser threads straight in.
The adaptor features gold-plated contacts to ensure a clean, low-resistance connection. It supports atomisers up to 24mm without overhang — anything beyond that will sit proud of the mod body. The Origin X mod itself puts out up to 60W and handles resistances from 0.15 to 2.0ohm, so most sub-ohm tanks and MTL setups will fall within that range comfortably.
It's a single-item accessory. No extra cables, no configuration required. Fit the adaptor, thread on your tank, and the mod reads the coil and runs as normal.
Product Specifications
| Specification | Details |
| Compatible Device | OXVA Origin X Pod Kit |
| Dimensions | 20 Ă— 25 Ă— 34.5mm |
| Connection Type | Magnetic (to mod) / 510 Thread (to atomiser) |
| Contacts | Gold-Plated |
| Max Atomiser Diameter | 24mm |
| Mod Wattage Range | 5–60W (Origin X) |
| Mod Resistance Range | 0.15–2.0ohm (Origin X) |
| Box Contents | 1 Ă— OXVA Origin X 510 Thread Adaptor |
Key Benefits
Expands What You Can Use — The Origin X is a capable 60W mod running on an 18650. With this adaptor fitted, the same device works with most sub-ohm tanks, MTL tanks, and rebuildable atomisers you'd use on a standard box mod.
Magnetic Fit — Same as the Pod — No screws, no tools. The adaptor connects to the Origin X the same way the pod does. Swapping between pod mode and 510 mode takes a matter of seconds.
Gold-Plated Contacts — Reduces resistance at the connection point and holds up better over time compared to unplated contacts. Consistent conductivity with each use.
24mm Diameter Support — Fits the majority of mainstream tanks without overhang. A 22mm atomiser sits flush; 24mm fits without issue.
Costs Very Little, Adds a Lot — At this price, it's one of the more practical accessories available for the Origin X. No need to buy a separate mod if you want to run a different tank.
Setup
- Remove the Origin X pod from the device by pulling it free of the magnetic connection
- Align the 510 adaptor with the magnetic contacts on the mod and press it into place
- Thread your chosen 510 tank or atomiser into the adaptor
- Power on the Origin X — it will read the coil resistance automatically
- Adjust wattage to suit your coil and begin vaping
Compatibility
The OXVA Origin X 510 Adaptor is designed exclusively for the OXVA Origin X Pod Kit. It is not compatible with other OXVA devices or third-party pod mods.
When paired with the Origin X, it supports:
- 510-thread sub-ohm tanks (up to 24mm diameter)
- 510-thread MTL tanks
- Rebuildable atomisers (RDAs, RTAs) within the 0.15–2.0ohm resistance range
- Wattage up to 60W (Origin X limit)
Note: The Origin X charges via USB-C at the base of the device. Remove any tank with a bottom-feed design before charging to avoid leaks.
Price
The OXVA Origin X 510 Adaptor is available at Vape Online Store. Check the product page for current pricing and stock availability.Â
Get exclusive website-only deals and be the first to hear about new arrivals — subscribe to our newsletter.
FAQs
- Will this adaptor work with any OXVA device other than the Origin X? No. This adaptor is made specifically for the OXVA Origin X. The magnetic connection is unique to that device.
- What size tanks can I use with it? Up to 24mm diameter without overhang. A 22mm tank will sit flush. Anything wider than 24mm will extend beyond the mod's deck.
- Does the adaptor affect performance? Not in any meaningful way. The gold-plated contacts ensure a clean connection and the mod's chipset reads the coil and operates as normal.
- Is there any wobble when a tank is fitted? Some minor movement is normal with magnetic connections. The fit is secure enough for normal use, but tanks won't be as rigid as they would on a threaded mod top.
- Can I use an RDA or RTA with it? Yes, as long as the build resistance is within 0.15–2.0ohm and the atomiser diameter is 24mm or under.
- Does it come with anything else in the box? Just the adaptor — one unit per pack.
Original: $4.01
-70%$4.01
$1.20Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
One small accessory that genuinely changes what the Origin X can do. Snap this adaptor onto your OXVA Origin X in place of the pod and you've got a 510-thread mod capable of running tanks and rebuildables up to 24mm wide. If you already own the Origin X and want more flexibility from it, this is the most sensible purchase you can make.
Overview
The OXVA Origin X 510 Adaptor is a direct replacement for the standard pod on the Origin X kit. It uses the same magnetic connection as the pod, so installation is as simple as pulling one off and pushing the other on. From there, any standard 510-threaded tank or atomiser threads straight in.
The adaptor features gold-plated contacts to ensure a clean, low-resistance connection. It supports atomisers up to 24mm without overhang — anything beyond that will sit proud of the mod body. The Origin X mod itself puts out up to 60W and handles resistances from 0.15 to 2.0ohm, so most sub-ohm tanks and MTL setups will fall within that range comfortably.
It's a single-item accessory. No extra cables, no configuration required. Fit the adaptor, thread on your tank, and the mod reads the coil and runs as normal.
Product Specifications
| Specification | Details |
| Compatible Device | OXVA Origin X Pod Kit |
| Dimensions | 20 Ă— 25 Ă— 34.5mm |
| Connection Type | Magnetic (to mod) / 510 Thread (to atomiser) |
| Contacts | Gold-Plated |
| Max Atomiser Diameter | 24mm |
| Mod Wattage Range | 5–60W (Origin X) |
| Mod Resistance Range | 0.15–2.0ohm (Origin X) |
| Box Contents | 1 Ă— OXVA Origin X 510 Thread Adaptor |
Key Benefits
Expands What You Can Use — The Origin X is a capable 60W mod running on an 18650. With this adaptor fitted, the same device works with most sub-ohm tanks, MTL tanks, and rebuildable atomisers you'd use on a standard box mod.
Magnetic Fit — Same as the Pod — No screws, no tools. The adaptor connects to the Origin X the same way the pod does. Swapping between pod mode and 510 mode takes a matter of seconds.
Gold-Plated Contacts — Reduces resistance at the connection point and holds up better over time compared to unplated contacts. Consistent conductivity with each use.
24mm Diameter Support — Fits the majority of mainstream tanks without overhang. A 22mm atomiser sits flush; 24mm fits without issue.
Costs Very Little, Adds a Lot — At this price, it's one of the more practical accessories available for the Origin X. No need to buy a separate mod if you want to run a different tank.
Setup
- Remove the Origin X pod from the device by pulling it free of the magnetic connection
- Align the 510 adaptor with the magnetic contacts on the mod and press it into place
- Thread your chosen 510 tank or atomiser into the adaptor
- Power on the Origin X — it will read the coil resistance automatically
- Adjust wattage to suit your coil and begin vaping
Compatibility
The OXVA Origin X 510 Adaptor is designed exclusively for the OXVA Origin X Pod Kit. It is not compatible with other OXVA devices or third-party pod mods.
When paired with the Origin X, it supports:
- 510-thread sub-ohm tanks (up to 24mm diameter)
- 510-thread MTL tanks
- Rebuildable atomisers (RDAs, RTAs) within the 0.15–2.0ohm resistance range
- Wattage up to 60W (Origin X limit)
Note: The Origin X charges via USB-C at the base of the device. Remove any tank with a bottom-feed design before charging to avoid leaks.
Price
The OXVA Origin X 510 Adaptor is available at Vape Online Store. Check the product page for current pricing and stock availability.Â
Get exclusive website-only deals and be the first to hear about new arrivals — subscribe to our newsletter.
FAQs
- Will this adaptor work with any OXVA device other than the Origin X? No. This adaptor is made specifically for the OXVA Origin X. The magnetic connection is unique to that device.
- What size tanks can I use with it? Up to 24mm diameter without overhang. A 22mm tank will sit flush. Anything wider than 24mm will extend beyond the mod's deck.
- Does the adaptor affect performance? Not in any meaningful way. The gold-plated contacts ensure a clean connection and the mod's chipset reads the coil and operates as normal.
- Is there any wobble when a tank is fitted? Some minor movement is normal with magnetic connections. The fit is secure enough for normal use, but tanks won't be as rigid as they would on a threaded mod top.
- Can I use an RDA or RTA with it? Yes, as long as the build resistance is within 0.15–2.0ohm and the atomiser diameter is 24mm or under.
- Does it come with anything else in the box? Just the adaptor — one unit per pack.