OXVA Unipro Airflow Ring
One ring. That's all this is. But if you've lost it during a coil swap on your OXVA Velocity — which happens more than OXVA would probably like to admit — the whole airflow system stops working until you replace it. This is that replacement.
Overview
The UniPro airflow ring screws onto the base of the Unipro coil and controls how much air gets through to the coil. Single air slot, 7 × 1.5mm, fully adjustable from open to closed. Dial it in tight for a more restricted draw, open it up for something closer to RDL — it's a wide enough range to cover most preferences.
One thing worth knowing about the Velocity kit before you buy this: the airflow ring is shared across coils. One ring, not one per coil. When you change coils, you unscrew the ring from the old coil and thread it onto the new one. Sounds fine until you're changing coils in a hurry and it rolls off a desk. This replacement is exactly what OXVA sells for that scenario.
Threaded connection onto the coil base — no press fit, no magnets. Screws on, stays put. Compatible with the 0.15Ω and 0.3Ω Unipro coils and the Unipro RBA deck.
One ring per pack.
Product Specifications
| Specification | Details |
| Compatible Coils | OXVA UniPro 0.15Ω, 0.3Ω, UniPro RBA |
| Compatible Kit | OXVA Velocity / Velocity LE |
| Air Slot | Single — 7 × 1.5mm |
| Airflow | Fully Adjustable |
| Connection | Threaded |
| Box Contents | 1 Ă— Airflow Ring |
Key Benefits
If you've lost the original ring, this gets the Velocity back to working order. There's no workaround — without the airflow ring the coil doesn't seat or seal correctly in the pod.
Adjustable across a decent range. The 7 Ă— 1.5mm slot covers from fairly restricted MTL through to a comfortable RDL depending on how far you rotate it. Not the most complex airflow system, but it does what it needs to.
Threaded fit means it's secure. Doesn't rattle or shift mid-session. The main risk is forgetting to move it when you swap coils — which is how most people end up needing to buy this in the first place.
Installation
Screw the ring onto the base of the Unipro coil — it threads on clockwise. Press the coil into the pod, fill, prime for 10 minutes, then vape. When replacing coils, remove the ring first before pulling the old coil out.
Compatibility
Works with the following Unipro coils on the OXVA Velocity and Velocity LE kits:
- UniPro 0.15Ω Mesh Coil (60–80W)
- UniPro 0.3Ω Mesh Coil (30–40W)
- UniPro RBA Deck
Not compatible with the Unicoil series or any other OXVA coil line.
Price
The OXVA UniPro Airflow Ring is available at Vape Online Store — check the product page for current pricing.
FAQs
- Why do I need this separately? The Velocity kit ships with one airflow ring. It's shared between coils — you move it across when changing. Lose it and there's nothing to replace it with except this.
- Does it affect the coil performance? Not the coil itself, no. It controls airflow into the pod. Too open and the draw feels loose; too closed and there's barely anything coming through. Finding your spot takes about thirty seconds.
- Will it fit Unicoils? No. The UniPro and Unicoil systems use different rings. This one is UniPro only.
- Is one enough to buy? Probably worth grabbing two if you're the type to change coils regularly. They're small, they disappear easily, and shipping again for one part is never ideal.
- Does it come with the Unipro RBA? No, the RBA is sold separately. But this ring is compatible with it once you have one.
Original: $4.01
-70%$4.01
$1.20Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
One ring. That's all this is. But if you've lost it during a coil swap on your OXVA Velocity — which happens more than OXVA would probably like to admit — the whole airflow system stops working until you replace it. This is that replacement.
Overview
The UniPro airflow ring screws onto the base of the Unipro coil and controls how much air gets through to the coil. Single air slot, 7 × 1.5mm, fully adjustable from open to closed. Dial it in tight for a more restricted draw, open it up for something closer to RDL — it's a wide enough range to cover most preferences.
One thing worth knowing about the Velocity kit before you buy this: the airflow ring is shared across coils. One ring, not one per coil. When you change coils, you unscrew the ring from the old coil and thread it onto the new one. Sounds fine until you're changing coils in a hurry and it rolls off a desk. This replacement is exactly what OXVA sells for that scenario.
Threaded connection onto the coil base — no press fit, no magnets. Screws on, stays put. Compatible with the 0.15Ω and 0.3Ω Unipro coils and the Unipro RBA deck.
One ring per pack.
Product Specifications
| Specification | Details |
| Compatible Coils | OXVA UniPro 0.15Ω, 0.3Ω, UniPro RBA |
| Compatible Kit | OXVA Velocity / Velocity LE |
| Air Slot | Single — 7 × 1.5mm |
| Airflow | Fully Adjustable |
| Connection | Threaded |
| Box Contents | 1 Ă— Airflow Ring |
Key Benefits
If you've lost the original ring, this gets the Velocity back to working order. There's no workaround — without the airflow ring the coil doesn't seat or seal correctly in the pod.
Adjustable across a decent range. The 7 Ă— 1.5mm slot covers from fairly restricted MTL through to a comfortable RDL depending on how far you rotate it. Not the most complex airflow system, but it does what it needs to.
Threaded fit means it's secure. Doesn't rattle or shift mid-session. The main risk is forgetting to move it when you swap coils — which is how most people end up needing to buy this in the first place.
Installation
Screw the ring onto the base of the Unipro coil — it threads on clockwise. Press the coil into the pod, fill, prime for 10 minutes, then vape. When replacing coils, remove the ring first before pulling the old coil out.
Compatibility
Works with the following Unipro coils on the OXVA Velocity and Velocity LE kits:
- UniPro 0.15Ω Mesh Coil (60–80W)
- UniPro 0.3Ω Mesh Coil (30–40W)
- UniPro RBA Deck
Not compatible with the Unicoil series or any other OXVA coil line.
Price
The OXVA UniPro Airflow Ring is available at Vape Online Store — check the product page for current pricing.
FAQs
- Why do I need this separately? The Velocity kit ships with one airflow ring. It's shared between coils — you move it across when changing. Lose it and there's nothing to replace it with except this.
- Does it affect the coil performance? Not the coil itself, no. It controls airflow into the pod. Too open and the draw feels loose; too closed and there's barely anything coming through. Finding your spot takes about thirty seconds.
- Will it fit Unicoils? No. The UniPro and Unicoil systems use different rings. This one is UniPro only.
- Is one enough to buy? Probably worth grabbing two if you're the type to change coils regularly. They're small, they disappear easily, and shipping again for one part is never ideal.
- Does it come with the Unipro RBA? No, the RBA is sold separately. But this ring is compatible with it once you have one.